OTS Buddy Phone MKII

SKU: OTSBuddyPhoneMKII Categories: , ,

Quantity available: 3

Description:
The Buddy Phone® is a digital, micro-miniature,
ultrasonic transceiver allowing communication between two or more scuba divers or surface stations. Using “Digital Signal Processing” (DSP) techniques, the Buddy Phone produces uncompromising speech clarity. Special digital filters, combined
with the latest diver microphone technology, virtually eliminate unwanted noise and distortion. With the addition of an Aquacom® surface transceiver, communications between the surface and divers are possible. The Buddy Phone utilizes the push-to-talk method, which has been shown to be the most reliable way to activate the transmitter. The greatest advantage of the push-to-talk method compared to a voice activated system (VOX) is the elimination of the VOX delay required between transmission and reception that
can result in lost communications.

Specs:
Nominal Range: 50 to 500 meters, depending on sea
conditions and noise levels in the water
Transmission Type: Ultrasound using upper single sideband
(USB)
Transmit Output Power: 1/2 watt PEP (peak envelope power)
Standard Frequency*: Freq. A (Channel 1): 32.768 kHz USB
Freq. B (Channel 4): 31.250 kHz LSB
Audio Bandwidth: 300 to 3000 Hz
Automatic Gain Control: Greater than 80 dB
Earphone: Ceramic
Microphone: ME-16R Hot-Mic®: Dynamic
Super Mic® (standard): Ceramic
Transducer: Ceramic cylinder
Battery Type: Alkaline 9-volt “transistor” type #522,
Ultralife® lithium 9-volt cell, or iPowerUs™
Li-polymer rechargeable 9-volt cell (must
recharge w/ iPowerUS™ charger #DC9VSTL-CHARGER.)
Maximum Operating Depth: 130 feet in sea water
Weight in Air: XT-100: 13 oz., including HM-2
RX-100: 7 oz.
Buddy Phone® for FFM: 8.1 oz.

Scroll to Top