Lectrosonics UH100 UHF Plug on transmitter
$0.00
$15
Quantity available: 1
Description:
The UH100 combines over 80 years of engineering experience with the very latest components, in a design that addresses the most demanding professional applications. Two hundred fifty six frequencies are user selectable in 100kHz steps to alleviate
interference problems in travelling venues.
The UH100 is a rugged, machined aluminum package. Phantom power is provided on pins 2 and 3. Level indicating LEDs are provided to make level settings quick and accurate, without having to view the receiver. The battery compartment accepts any 9 Volt alkaline or lithium battery and makes a positive connection via self-adjusting contacts.
Specs:
Operating frequencies: 537.6 to 588.7 MHz, 614.4 to 793.5 MHz
Frequency selection: 256 frequencies in 100kHz steps
RF Power output: 100 mW (nominal)
Frequency stability: ± 0.002%
Deviation: ± 20 kHz (max)
Spurious radiation: 90 dB below carrier at frequencies less than 1GHz
Equivalent input noise: -126 dBV
Input level: Nominal 2 mV to 300 mV, before limiting.
Input greater than 2V, with limiting.
Input impedance: 1K Ohm mic load impedance
Input compressor: Soft compressor, >30 dB range
Gain control range: 43 dB; semi-log rotary control
Modulation indicators: Dual LEDs indicate modulation level 12 dB below limiting and at
the onset of limiting.
Controls: 2-position “OFF-ON” slide switch. Control panel knob adjusts audio
gain. Rotary switches on side panel adjust transmitter frequency.
Audio Input Jack: 3-Pin XLR
Battery: Precision compartment auto-adjusts to accept any known alkaline
or lithium 9 Volt battery. (WeÂ’ve tried 150 different ones!)
Battery Life: 5 Hours with alkaline 9 Volt, 12 hrs with lithium
Weight: 6.6 ozs. including battery
Dimensions: 1.5 x 1.5 x 4.2 inches
Emission Designator: 180KF3E